DC 101 – Servo Motor Output Stage
-
- +48 V DC, 10 A continuous current and 20 A peak current
- Resolver input for positioning feedback (12 bits)
- 2-channel enable input for STO Safe Torque Off (SIL 3/PL e, Cat. 4)
- Holding brake
- External regen resistor optional
- For controlling a synchronous servo motor
For the DC 101, AKM low-voltage servo motors are available. For simple control cabinet integration of the S-DIAS system, EPLAN Macros are provided.
Description
-
- +48 V DC, 10 A continuous current and 20 A peak current
- Resolver input for positioning feedback (12 bits)
- 2-channel enable input for STO Safe Torque Off (SIL 3/PL e, Cat. 4)
- Holding brake
- External regen resistor optional
- For controlling a synchronous servo motor
For the DC 101, AKM low-voltage servo motors are available. For simple control cabinet integration of the S-DIAS system, EPLAN Macros are provided.
Technical Data
Performance Data |
|
| Supply voltage | +24 V DC (+18-30 V DC) |
| Voltage monitor | Yes |
Digital Inputs |
|
| Type | Enable |
| Number | 2 |
| Input voltage | +24 V DC (+18-30 V DC) |
| Input current | 3 mA at +24 V DC |
| Input delay | typically 0.5 ms |
Resolver |
|
| Number | 1 |
| Resolution | 12 bits |
| Output voltage | typically 7 V rms |
| Output current | 200 mA |
| Output frequency | 8 kHz |
Motor Driver |
|
| Type | brushless, 4-quadrant regulator with position setting |
| Max. continuous current | 10 A |
| Max. peak current (10 sec) | 20 A |
Holding Brake |
|
| Output voltage | +24 V DC |
| Max. continuous current | 500 mA |
| Short-circuit protection | Yes |
Regen Resistor |
|
| Type | external power resistor |
| Output | GND-schaltend |
| Max. Current | 10 A |
| Short-circuit protection | Yes |
Mechanical Features |
|
| Dimensions | 25 x 104 x 72 mm (W x H x D) |
| Protection type | IP20 |
Article Number/Certification |
|
| Article number | 20-014-101 |
Downloads
PDF | 118 KB
PDF | 1.7 MB
PDF | 594 KB
Related products
Leave a Reply